HGM9200/9300/9400 series generator controllers are used for automatic and monitor control system of gen-set to achieve automatic start/stop, data measure, alarm protection and “three remote” (remote control, remote measuring and remote communication). The controller adopts large liquid crystal display (LCD) and selectable Chinese, English or other languages interface with easy and reliable operation.
HGM9200/9300/9400 gen-set automatic controllers adopt 32 bits micro-processor technology with precision parameters measuring, fixed value adjustment, time setting and threshold adjusting and etc..Majority parameters can be configured from front panel, and all parameters can be configured by USB interface (or RS485/Link interface) to adjust via PC. It can be widely used in all types of automatic gen-set control system with compact structure, advanced circuits, simple connections and high reliability.
Performance and Characteristics
HGM9X10, Auto Start Module. It controls gen-set to start or stop automatically by remote start signal.
HGM9X20, Auto Main Failure, updates based on HGM9X10, especially for automatic system composed by gens and mains.
♦With ARM-based 32-bit SCM, high integration of hardware and more reliable;
♦132×64 LCD with backlight, Chinese, English or other languages display, gentle push button for operation;
♦Acrylic materials used for protecting LCD screen, wearable performance is better;
♦Silica-gel panel and buttons, more adaptable to high or low temperature;
♦Equipped with RS485 communication port and “remote control, remote measuring, remote communication” achieved by the MODBUS protocol. (controller with RS485 port only);
♦Equipped with SMS (Short Message Service) function. When gen-set is alarming, controller can send short messages via SMS automatic to max. 5 telephone numbers. User can control or check gen-set by sending Short Message (controller with GSM port only);
♦Equipped with CANBUS port and can communicate with EFI machine possessing J1939. Not only can users monitoring frequently-used data (such as water temperature, oil pressure, rotate speed, fuel consumption and so on) of EFI machine, but also control crank on, shutdown , raising speed and speed droop via CANBUS port. (controller with CAN BUS port only);
♦Suitable for various system of 3-phase 4-wire, 3-phase 3-wire, 1-phase 2-wire, and 2-phase 3-wire (120/240V) power, 50/60Hz;
♦For Mains, controller has over and under voltage, over and under frequency, loss and anti-phase functions; For gens, controller has over and under voltage, over and under frequency, loss and anti-phase, over and anti-power, over current functions;
♦3 fixed analog sensors (temperature, oil pressure and liquid level);
♦2 configurable sensors can be set as sensor of temperature, pressure or fuel level;
♦Precision measure and display parameters about Engine;
♦Control protection, Start & Stop gen-set, ATS(Auto Transfer Switch) control with perfect failure protection function;
♦All output ports are relay-out;
♦User can modify and store parameters into internal FLASH memory; the parameters setting cannot be lost even without power. Majority parameters can be configured from front panel, and all parameters can be configured by USB interface (or RS485 interface) to adjust via PC.
♦More kinds of curves of temperature, pressure, fuel level can be used directly and users can define the sensor curves by themselves;
♦More conditions of crank disconnect (speed sensor, oil pressure, generator frequency) are optional;
♦Widely power supply range (8~35)VDC, accommodating to different starting battery voltage environment;
♦Event log, real-time clock, timing start & stop generator (can be set as start gen-set once a day/week/month with load or not);
♦Can be used for the pumping unit as well as an indicating instrument (indicate and alarm are enable only, relay is inhibited );
♦With maintenance function. Actions (warning only or shutdown alarm) can be set when maintenance time out;
♦All parameters adopt digital adjustment, instead of conventional analog modulation with normal potentiometer, more reliability and stability;
♦Rubber ring between controller and shell, excellent waterproof ability can reach IP55;
♦Metal fixing clips enable perfect in high temperature environment;
♦Modular design, inflaming retarding ABS plastic shell, pluggable type connection terminals and embedded installation mode. Compact structure with easy mounting.